top of page
blue-1634110_1280.png

Named after the 16th-century English physicist William Gilbert, the gilbert (Gb) is the standard unit of magnetomotive force (MMF) in the CGS (centimeter-gram-second) electromagnetic system, representing a magnetic circuit's driving "push" (analogous to electromotive force, or EMF, in an electrical circuit) that establishes magnetic flux through a magnetic path. One gilbert is equivalent to 10 / (4π) ampere-turns, or approximately 0.7958 ampere-turns, in modern SI usage.

Industrial Applications

In precision magnetic engineering, magnetomotive force serves as the magnetic equivalent of voltage in an electrical circuit, representing the total source excitation driving magnetic flux across soft magnetic cores, return paths, and working air gaps. While modern electromagnetic simulations and engineering specifications rely on SI units (evaluating total ampere-turns), gilberts occasionally appear in legacy CGS-era documentation and historical physics formulas alongside gauss and oersteds. When working from legacy datasheets or converting older circuit calculations, magnetic design engineers translate gilberts into ampere-turns to size coil windings and excitation currents for electromagnets, linear voice coil actuators, and hybrid assemblies—ensuring sufficient flux across critical working gaps without driving pole pieces into magnetic saturation or overheating copper windings.

Technical Specifications
Governing Relations (Hopkinson's Law & Ampère's Law):

  • Hopkinson's Law (Magnetic Ohm's Law): F = Φ × R

    • F = Magnetomotive force in gilberts (Gb)

    • Φ (Phi) = Magnetic flux in maxwells (Mx), where 1 Mx = 1 line of magnetic force = 10⁻⁸ webers (Wb)

    • R = Magnetic reluctance in gilberts per maxwell (Gb/Mx)

  • Coil Excitation Formula: F = (4π / 10) × N × I ≈ 1.2566 × N × I

    • N = Number of coil turns

    • I = Current in amperes (A)

    • N × I = Ampere-turns (customary SI unit; formally amperes)

  • Path-Integral Relation (Uniform Field): F = H × L

    • Derived from Ampère's circuital law (F = ∮ H · dl) reduced to the uniform-field case, assuming a uniform magnetic field strength (H) along the path length (L).

    • H = Magnetic field strength in oersteds (Oe)

    • L = Path length in centimeters (cm)

  • Unit Equivalences (CGS to SI):

    • 1 Gilbert (Gb) = 10 / (4π) ampere-turns ≈ 0.79577 At (customary SI unit; formally amperes)

    • 1 Ampere-turn (At) = 4π / 10 gilberts ≈ 1.25664 Gb

    • 1 Oersted (Oe) = 1000 / (4π) A/m ≈ 79.577 A/m


Common Engineering & Manufacturing Challenges:

  • CGS-to-SI Conversion Mismatches: Engineering drawings and legacy datasheets that mix CGS values (gilberts, oersteds, gauss) with SI simulation inputs (ampere-turns, A/m, teslas) frequently introduce 4π scaling errors—particularly between oersteds and A/m or gilberts and ampere-turns—during Finite Element Analysis (FEA) setups.

  • Air Gap Reluctance Dominance: Because air has a relative magnetic permeability of approximately 1, narrow working gaps consume the vast majority of a magnetic circuit's total magnetomotive force. Neglecting fringing and leakage at the gap leads to inaccurate gap-flux estimates and an under-specified excitation.

  • Thermal Drift in Windings: As copper coil windings heat up during continuous or high-duty-cycle operation, increased electrical resistance reduces effective current (I), causing a direct drop in delivered magnetomotive force unless driven by a closed-loop, constant-current power supply.


Related Case Studies and Products
Ready to Optimize Your Magnetic Circuit?

Whether you are converting legacy CGS specifications into modern electromagnetic assemblies or balancing flux density across custom air gaps, QT Magnetic Solutions provides complete engineering design, FEA simulation, and turnkey fabrication.

Contact QT Magnetic Solutions Today

Email: engineering@qtmagneticsolutions.com | Phone: (408) 261-3589

GILBERT

QT Magnetic Solutions     561 Monterey Rd.       Morgan Hill, CA 95037       (408) 261-3589

© CONTENT COPYRIGHT 2026 QT MAGNETIC SOLUTIONS. ALL RIGHTS RESERVED.

bottom of page