
QT Magnetic Solutions offers the industry's leading custom-designed magnets and magnetic assemblies. From consultation to design, production and assembly, QT Magnetic Solutions can handle every phase of your project.
engineering@qtmagneticsolutions.com 408.261.3589

A closed circuit condition occurs when the entire external magnetic flux path of a permanent magnet is confined within high-permeability ferromagnetic material with zero air gap. Under this ideal state, magnetic flux leakage into the surrounding environment is eliminated, and the magnet operates at its residual induction (Br).
Industrial Applications
In precision magnetic engineering, the closed circuit condition serves as the standard benchmark for material testing and quality assurance. Closed-loop permeameters and hysteresisgraphs (operating under standards such as ASTM A977 and IEC 60404-5) clamp a magnet specimen directly between heavy soft-iron or iron-cobalt (Permendur) pole pieces. Because the return path offers negligible magnetic reluctance, self-demagnetizing fields are eliminated, allowing engineers to accurately measure intrinsic material properties—including residual flux density (Br), normal coercivity (Hc), intrinsic coercivity (Hci), and maximum energy product (BHmax).
Beyond laboratory metrology, closed-circuit design principles are applied in magnetic workholding chucks, heavy-duty lifting magnets, bi-stable latching actuators, and protective soft-iron "keepers" used to prevent low-coercivity magnets (such as Alnico) from self-demagnetizing during shipping and storage. Channeling the entire flux path through a ferromagnetic steel circuit maximizes mechanical holding force at the contact face while shielding nearby sensitive electronics from stray magnetic fields.
Technical Specifications
Key Variables & Units
Magnetic Flux Density / Induction (B): Measured in Gauss (G) in CGS units or Tesla (T) in SI units (1 T = 10,000 G). In an ideal closed circuit, operating flux density reaches the magnet's residual induction:B = Br
Demagnetizing Field (Hd): Measured in Oersteds (Oe) in CGS units or Amperes per meter (A/m) in SI units (1 Oe ≈ 79.58 A/m). With zero air gap to create an opposing magnetomotive force, the internal demagnetizing field drops to zero:Hd = 0
Permeance Coefficient (Pc): The dimensionless slope of the operating load line on the second-quadrant demagnetization curve. In CGS units (with B in Gauss and H in Oersteds), Pc = -B / H (or Pc = -B / (μ0 × H) in SI units, where μ0 = 4π × 10^-7 H/m). In an ideal closed circuit with zero air gap and infinite return-path permeability, Pc approaches infinity (Pc → ∞), placing the operating point directly on the vertical B-axis.
Relative Permeability (μr): The dimensionless ratio of a material's magnetic permeability to the permeability of free space (μ / μ0). Effective closed-circuit return paths require soft ferromagnetic materials with high relative permeability—such as low-carbon steel (e.g., AISI 1018, μr ≈ 500 to 1,000) or annealed electrical iron and silicon steel (μr ≈ 2,000 to 5,000+).
Common Manufacturing & Design Challenges
Surface Roughness and Protective Coatings (Effective Air Gaps): In real-world production, a true zero air gap is physically unattainable. Microscopic surface roughness at mating interfaces and protective finishes—such as standard nickel-copper-nickel (Ni-Cu-Ni) plating (10 to 25 μm thick) or epoxy coatings (20 to 50 μm thick)—introduce thin layers of low-permeability or non-magnetic material. Even a 25 μm (0.001 in) effective gap adds magnetic reluctance, pulling the permeance coefficient down from infinity and creating localized fringing flux.
Return-Path Magnetic Saturation: If the cross-sectional area of the steel yoke or pole piece is sized too thinly for the total magnetic flux (Φ = B × A), the return path will saturate (typically around 1.6 to 2.0 T for low-carbon steels and 2.0 to 2.15 T for silicon steels). Once saturated, the steel's incremental permeability drops sharply toward that of free space (μr → 1), forcing magnetic flux out into the surrounding air and breaking the closed-circuit condition.
Datasheet Values vs. Open-Circuit Assembly Behavior: Supplier datasheet specifications (Br, Hc, Hci, BHmax) are measured inside closed-circuit permeameters. In end-use products, however, magnets almost always operate with working air gaps (open or semi-closed circuits). Engineers must model the complete magnetic circuit load line to confirm that transitioning from a closed fixture to an open working gap—especially at elevated temperatures—will not push the magnet below the knee of its demagnetization curve and cause irreversible flux loss.
Related Case Studies and Products
Optimize Magnetic Circuit Topology: Discover how our engineering team designs custom return yokes, pole pieces, and flux-containment housings on our Mechanical and Structural Design Services page.
Verify Flux Containment with Simulation: Prevent premature steel saturation and map working-point shifts before tooling using our Magnetic Solutions and FEA Simulation Services.
Understand Operating Point Shifts: Explore The Curve That Tells You Everything: BH Curves for Non-Engineers to see how operating points move when transitioning from closed test fixtures to real-world air gaps.
Compare Magnet Grade Performance: Read N35 vs N52: What Those Numbers on a Neodymium Magnet Actually Mean to evaluate holding force and thermal stability in direct steel-contact versus open-circuit setups.
Need Engineering Support for Your Magnetic Assembly?
Whether you are designing a high-holding-force magnetic assembly, eliminating stray flux leakage, or sizing ferromagnetic return paths for production, our engineers can help model, prototype, and manufacture your solution.
Phone: (408) 261-3589
Request a Consultation: Contact QT Magnetic Solutions
